Unsolved
This post is more than 5 years old
3 Posts
0
37787
PowerEdge720 PSU Fault
Hello.
After update firmaware for PowerSuply i have PSU Fault.
If i see lifecycle control in firmware update -
Power Supply.Slot.1 Current 09.00.00 avalible 09.2B.80
Power Supply.Slot.2 Current 09.2B.80 avalible 09.2B.80
At front screen error PSU0006 Power Supply1 is incorrectly configured. Check PSU.
How i can update firmaware or make it work?
DELL-Chris H
Moderator
Moderator
•
8.8K Posts
0
February 5th, 2015 07:00
Alex-32,
Normally the PSU0006 error is referring to a power supply mismatch, being that one of the power supplies is of a different voltage or model. If this isn't the case I would start with reseating the power supplies, then updating the server to current. You can find the BIOS, Drac, Lifecycle Controller, and other updates here.
After that verify if the error has cleared, or still present.
AleX-32
3 Posts
0
February 6th, 2015 05:00
Dell-Chris H on,
After remove-insert PSU PSU0006 error clear. But PSU.01 have a blinking amber.
How I can update firmware PSU.01?
DELL-Chris H
Moderator
Moderator
•
8.8K Posts
0
February 6th, 2015 05:00
Yes you can. This is the link to the 09.2B.80 version that 02 is showing. http://www.dell.com/support/home/us/en/19/Drivers/DriversDetails?driverId=JX7PR&fileId=3413985843&osCode=WS8R2&productCode=poweredge-r720&languageCode=EN&categoryId=PS
Let me know how it goes after the update.
AleX-32
3 Posts
0
February 10th, 2015 01:00
I'm happy. I'm very HAPPY.
Now i have 2 PSU with blinking amber and server do not start.
What i can do?