Start a Conversation

Unsolved

This post is more than 5 years old

16393

November 24th, 2011 03:00

Poweredge 1850 Perc4 , what drivers for 2008 (x64) ?

Poweredge 1850

Perc 4

2 x SCSI drives RAID1

Installing windows 2008 (x64) , when i get to the setup screen no DRIVES are visable to the OS to process the installation.

I understand i need to load 64-bit drivers but which drivers ?

Is it 64 bit drivers for the PERC 4 controller ?

If so what am i looking for on dell support ?

Thank you for any help
Scott 

31 Posts

November 24th, 2011 04:00

ok, think i have found the correct driver:

www.dell.com/.../DriverFileFormats

But its an EXE , cannot run it from Window Setup (the bit where it asks for a mass storage driver).

31 Posts

November 24th, 2011 04:00

LSI 2004

bios H418

PERC 4 e/SI

FW 516A (dram 256)

31 Posts

November 24th, 2011 04:00

many of the PERC4 driver dowloads appear to be wrapped into an EXE that cannot be run from Windows 2008 setup (find drivers option).

31 Posts

November 24th, 2011 04:00

No Events found!

Top