Unsolved
This post is more than 5 years old
6 Posts
0
6602
Poweredge 2650 - long bip at start
Good evening,
I have a poweredge 2650 and i try to install it. But, a start, juste after "press tu run configuration utility", they are long bip (several one per second) in continuous.
On the LCD monitor, I have the error "E0d76", but I don't know resolv this problem...
Can you help me for find the problem please ?
Thank's
PS : sorry for my english, I speak normaly french..
Dev Mgr
4 Operator
4 Operator
•
9.3K Posts
0
May 13th, 2009 13:00
Per the online troubleshooting guide for the 2650 this error code means you have either a failed drive or a failed raid controller.
My french isn't good enough to get you any closer than this to a french equivalent of this troubleshooting guide.
lucaslb
6 Posts
0
May 14th, 2009 01:00
Thank's for the response and the link.
I have test to remove all disk except one (I have got five hard disk on this server), but the error is always here. So I don't think is the drive.
If is not the drive, it's the raid controller. But how can i test this ?
Thank's