This post is more than 5 years old
7 Posts
0
86929
Poweredge 2950 boot problems
The following errors E1A11 Pci Rsr Config and E1A12 Pc Rsr Missing is usually displayed on the LCD, and server can not be switched on.
Expansion card raisers had been checked and repositioned just in case, but error had remained on E1A11. The E1A12 error code appears intermittently.
Please any assistance will be very much appreciated.
Thank you.
DELL-Chris H
Moderator
Moderator
•
8.5K Posts
1
January 18th, 2012 07:00
These errors are referring to a riser missing or they aren't in the right slots. The riser with the single PCIe slot will go in the center slot on the motherboard? Also, is the other riser a PCIe or PCI-X riser? Lastly, do you have another system we can test the risers with?
Akunew
7 Posts
0
January 20th, 2012 01:00
Chris,
Thanks so ,much for your response.
I did discover that the PCI-X riser was not sitting properly, and that must have resulted to that effect..
Presently is okay now.
Many thanks.
Kalu
Jirik
1 Message
0
September 15th, 2013 07:00
i know I'm Hijacking this post but seems like the Same error MSG...
In my Case I'm to replace the 1-Slot Factoy PCI-E Riser Card with a PCI-X 1 Slot Riser Card from a 1950.
No idear if that eaven works or is supposed to work ?