Unsolved
This post is more than 5 years old
53 Posts
0
1501
Putting an H710 in a T320
So getting a Dell T320 with an 8 bay hot swap backplane and an H310 RAID card in it. I'd like to put an H710 in there but I'd like to verify what model number I need. I know with the previous generation, there are RAID cards where one model number will work in the rack servers, and a different model will work in the towers, but not vice versa.
Also will the cables I have for the H310 work or will I need to get new cables for the H710? If so, what's the model number on that?
Also, is the RAID battery separate on the H710, like with a PERC6, or is it integrated in the card? If separate, anyone know what battery cable I need?
Thanks!
DELL-Daniel My
Moderator
Moderator
•
6.2K Posts
0
June 5th, 2018 14:00
Hello
The T320 uses the full height adapter version of the H710(p). The full height version of the controller has a mount point for the battery on the controller. The T320 is under the legacy tab on our PERC page.
http://www.dell.com/perc/
You should be able to use the existing cables from the H310.
Thanks