This post is more than 5 years old
2 Posts
0
1471
August 24th, 2018 09:00
T110 II pci-e graphic card bios
Hi, I've readed some post about the additional pci-e graphic card, my PNY GT710 has 19W power requirements and use the pci-e 8x/16X slot, but in bios (2.10) I cant change the setting value of embedded video.
No black screen or other error, simply card was not detected.
Any idea?
No Events found!
Daniel My
12 Elder
•
6.2K Posts
0
August 24th, 2018 11:00
Hello
I searched online for specifications on the card. I could not find detailed specifications. I found it listed as 19 TDP, that does not necessarily mean that it only uses 19 watts. The PCIe slots on the T110 II can provide a maximum of 25w.
Adding a GPU to the T110 II is not supported, so I don't have any suggestions on how to make it work. I suggest that you try to locate more detailed specifications to verify the required wattage from the PCIe slot. You should be able to locate specifications on the T110 II on the system support page.
http://www.dell.com/support/
Thanks
fileman
2 Posts
0
August 26th, 2018 22:00
Hi, thanks for the reply, typing error 19 tdp and 22w as power requirements http://www.pny.eu/consumer/explore-all-products/graphics-cards/643-geforce-gt-710-1gb-ddr3