Unsolved
This post is more than 5 years old
6 Posts
0
1314
T310 foreign configuration and missing drive
Hello,
I have a T310 running SBS 2008.
I wanted to clean it of dust so I shut it down and sprayed and vacuumed.
The server would not boot past to post.
It showed foreign configuration. I went into the Raid configuration and looked at the VD and it showed offline.
I looked at the physical disks and it shows HDD 0 as missing, HDD 1 foreign and HDD 2 & 3 as online.
Also the raid battery may be dead.
I'm at a loss here as to what to do next.
Also I cannot remember how to get to open manage.
Any help would be most appreciated.
Thanks,
Cepolly
theflash1932
9 Legend
9 Legend
•
16.3K Posts
0
August 18th, 2018 15:00
Boot to CTRL-R, highlight controller, F2, Foreign, and IMPORT the foreign configuration.
theflash1932
9 Legend
9 Legend
•
16.3K Posts
0
August 18th, 2018 16:00
Then you are in trouble.
Did you accept anything along the way, as far as configurations go?
Do you have a backup? You may need it.
Power down, unplug, reseat each drive, plug in, boot to CTRL-R, and try again.
Cepolly
6 Posts
0
August 18th, 2018 16:00
Thanks.
I just tried it and got a failed to import message with a code of 0xC.
Cepolly
6 Posts
0
August 18th, 2018 17:00
Honestly, I cannot remember. I may have.
I'll try that.