Unsolved
3 Posts
0
994
T610 no power up
i recently bought a T610 server. it had no raid card for the hard drives or cables. i bought one, installed it, installed the cables. i have the following ram
3- 4GB pc3-10600R
2- 4GB pc3- 12800u
1- 2GB pc3-10600U
4- 2GB pc3-10600R
4- 1GB pc3-10600U
no matter which ram slots i put them in, no matter which configuration. it still give me either no ram error message or bad configuration..
any suggestions?
will not even boot to BIOS
txguy
3 Posts
0
July 29th, 2018 08:00
ok, got it to boot up, not detecting a hard drive now though, gotta figure that out now...
txguy
3 Posts
0
July 29th, 2018 08:00
use the "U" or only use "R"?
theflash1932
7 Technologist
7 Technologist
•
16.3K Posts
0
July 29th, 2018 08:00
Your RAID upgrade seems completely unrelated.
You can't mix U and R.
theflash1932
7 Technologist
7 Technologist
•
16.3K Posts
1
July 29th, 2018 08:00
Either, but you can't mix.
U has more restrictions (max size, amount, etc.), so I would recommend R for future versatility.
theflash1932
7 Technologist
7 Technologist
•
16.3K Posts
0
July 29th, 2018 20:00
Can help walk you through it if you post more details ...