This post is more than 5 years old
17 Posts
0
13327
UPS MANAGEMENT CARD
Hello,
We have UPS Dell UPS Rack / Tower 2700W with Network Card "UPS MANAGEMENT CARD"
I need to change the sender address email alerts to pass my smtp.
How to do this?
This post is more than 5 years old
17 Posts
0
13327
Hello,
We have UPS Dell UPS Rack / Tower 2700W with Network Card "UPS MANAGEMENT CARD"
I need to change the sender address email alerts to pass my smtp.
How to do this?
Top
hotline22
17 Posts
1
March 4th, 2013 00:00
I'll find otherwise and elsewhere.
DELL-Geoff P
990 Posts
0
March 1st, 2013 07:00
Access the management card by going to : https://card ip address, then go down to application notifications. You should be able make the necessary changes here.
Link: http://ftp.dell.com/Manuals/all-products/esuprt_ser_stor_net/esuprt_rack_infrastructure/dell-line-interactive-tower-ups-500t_User%27s%20Guide16_en-us.pdf
Regards,
DELL-Geoff P
990 Posts
0
March 1st, 2013 07:00
With OpenManage Essentials installed, you can make the necessary changes. Here is a guide: downloads.dell.com/.../dell-opnmang-essentials-v1.0_User%27s%20Guide_en-us.pdf page 100 of 196 will walk you through the setup process.
Regards,
hotline22
17 Posts
0
March 1st, 2013 07:00
Thank you, I know the web interface, I want to change the sender address when sending warning with mail & smtp.
No field in https://IP/set_net.htm ?
DELL-Geoff P
990 Posts
0
March 1st, 2013 08:00
You will need to install the Dell UPS Management software. Then use this link to setup the email alerts:
ftp://ftp.dell.com/Manuals/all-products/esuprt_ser_stor_net/esuprt_rack_infrastructure/dell-line-interactive-tower-ups-500t_User%27s%20Guide11_en-us.pdf
Page 50 of 134 .
Regards,
hotline22
17 Posts
0
March 1st, 2013 08:00
I have already Multi-UPS Management Console, I wanted UPS independently of any hardware can send me their own alerts in case of failure of computers / servers.