Unsolved
This post is more than 5 years old
79 Posts
0
22233
Viewing the Hardware Event Log on R710 from OS ?
Is it possible to view the Hardware Event Log from Win2008 R2 OS ?
There is no connected DRAC and I do not want to reboot to view from BIOS...
Hamboney
79 Posts
0
July 12th, 2013 11:00
Thank you... will try.
theflash1932
7 Technologist
7 Technologist
•
16.3K Posts
0
July 12th, 2013 11:00
Yes, using OpenManage Server Administrator (OMSA):
ftp.dell.com/.../OM-SrvAdmin-Dell-Web-WIN-7.3.0-350_A00.exe
Download and run to extract, then run C:\Openmanage\windows\setup.exe. Add yourservernameoripaddress:1311 to IE's Intranet Zone.
Go to System, then Logs tab (Hardware subtab).
theflash1932
7 Technologist
7 Technologist
•
16.3K Posts
0
July 12th, 2013 12:00
Until you install a certificate, it will generate that warning ... just click continue.
Hamboney
79 Posts
0
July 12th, 2013 12:00
Clicking continue fails. More Info. gives the SSLError=1677216
Hamboney
79 Posts
0
July 12th, 2013 12:00
No luck.
Invalid Cert error. SSLError=1677216
theflash1932
7 Technologist
7 Technologist
•
16.3K Posts
0
July 12th, 2013 13:00
Are you opening the site (https://localhost:1311) in IE? Do you have any other settings/features/roles enabled that might be "out of the ordinary"? Is IE ESC enabled? Where exactliy are you seeing that "SSLError=1677216"? IE? I've never encountered that particular message.
Hamboney
79 Posts
0
July 15th, 2013 04:00
Yes, that is how I am opening the site.
I am trying this on an existing LAB Server that co-hosts SAN Management and VMWare. I will spin up a minty fresh OS and try it there.
Hamboney
79 Posts
0
July 15th, 2013 09:00
On a newly minted LAB Win2008 OS the OMSA software does load. I will have to investigate what is blocking it on the co-hosted LAB server.
On the new server however, after I save the Logs to disk (oma_x.zip - 105 KB) and try to open, the system says that the ZIP file is empty and will not extract/open. Even though there are ~60 Events shown in the web-page.