Start a Conversation

Unsolved

This post is more than 5 years old

C

27012

November 6th, 2003 15:00

!!***** Warning: Firmware is out-of-date, please update *****

After booting from floppy and updating my FlashBIOS from A10 to PowerEdge 6300, BIOS, A13... I am getting the following Warnings:

Embedded Server Management Firmware Revision 4.18
!!***** Warning: Firmware is out-of-date, please update *****
System Backplane Firmware Revision 5.12
!!***** Warning: Firmware is out-of-date, please update *****
Power Supply Paralleling Board Firmware Revision 2.32
!!***** Warning: Firmware is out-of-date, please update *****
Hot-Plug PCI Controller Revision 1.14
!!***** Warning: Firmware is out-of-date, please update *****

I been looking for the above updates in the Download section, but I am not able to find the exact updates. Am I missing something?

My system is a PowerEdge 6300

My understanding is that the Embedded Server Management is located on the system hard-drive. If you have drives have no OS then that message would come up. So I guess thats not really an issue here. Since I have no OS yet.

Any help will be appreciated!

1 Rookie

 • 

53 Posts

November 7th, 2003 18:00

You need to download the Dell ESM Firmware file from the download page.  This file contains all the firmware updates as well as the directions for updating the firmware.

8 Posts

November 10th, 2003 12:00

Thank you for the information.. it worked perfectly!!

The ESM, brings the firmware for all of the other components as the description says... :( too bad I didnt read all of the description...

Thank you again..

No Events found!

Top