Unsolved
This post is more than 5 years old
2 Posts
0
24466
c6100 no video,error code is D2
Hello.
I recently discovered that the computer boot sometimes "d2"(D2) Error number on the motherboard,no video, network search did not solve the problem.
I tried to remove all the cpu / ram, remove battery . only equipped with a cpu and 4gb ram battery , the problem remains.
Sometimes there will be a normal start (AA) enter windows. Others are (D2).
Debug code on the system board is "amibios" it?
Thank you
My device:
poweredge C6100
xeon x5650 x 2
4gb ddr1333 x6
DELL-Chris H
Moderator
Moderator
•
8.8K Posts
0
August 28th, 2015 07:00
Duke_Dell,
What I would suggest starting with is configuring the system to a Minimum hardware configuration. The
system will not turn on if any of the following are not properly installed
On the Node
On the Chassis
Other than those devices remove everything else and see if the system will POST. If it does then add the removed devices back individually until you either add all the parts back with no errors, or you are able to locate a part causing the issue.
Let me know the results from that and we can move forward from there.
duke_dell
2 Posts
0
August 28th, 2015 08:00
Thank you for your reply.
I understand, but I have tried the m
minimum hardware configuration. Also sometimes display D2.
AMI Bios error code D2 is "Disable DMA and Interrupt controllers".
should I correct?