Unsolved
This post is more than 5 years old
1 Message
0
14732
recover deleted virtual disk
Hi all,
is there any way to recover a deleted virtual disk on a PERC4/DC controller ?
The configuration is
poweredge 2650 with the above controller
and a pv220 storage
the deleted virtual disk was raid 10
Looking forward
theflash1932
9 Legend
9 Legend
•
16.3K Posts
0
December 14th, 2015 11:00
If you actually DELETED it, then no. The only thing you can do is called a retag, where you go through and configure RAID with the EXACT same settings as it previously had (size, stripe size, etc.). You MUST first disable Fast Init under Objects, and you MUST not initialize the array after creation.
If you maybe didn't delete it an it is just missing, boot to CTRL-M, Configure, View/Add ... if you are prompted between Disk and NVRAM, choose Disk, then save on exit.