HDD not detecting installation Windows server T150

Hello LuigiEspositoM,

I'm sorry to see the OS install does not detect any hard drives.

Are you using the PERC S150 Controller?

I would recommend to make sure the OS Driver pack is at the latest or you can try supply the controller driver during install.

Dell OS Driver Pack

https://dell.to/3tN9jIy

Installation instructions are at the bottom of the page.

Windows Server 2019 64bit driver for PERC S150 Controller

https://dell.to/3Nls24V

File Format: Update Package for MS Windows 64-Bit.

File Name: SAS-RAID_Driver_25H2F_WN64_6.3.0.0007_A00.EXE

Execute the file to extract files. Supply the content of the payload\win201964\ folder.

no i am not using the PERCS150 but a normal 2TB HDD. I am not an expert in the sector but usually I have installed orperative systems on the server of the R240 / R360. On this dell T150 I can't. I tried to install the PERCS150 driver but it doesn't detect it if I select the / payload / folder. I'm in big trouble I've been messing around for two days

i can't detect it even if i put the drivers

 Help  Me Please

Hello I have already tried with the Lifecycle Controller but cmq when it goes into the installation phase of Windows Server 2019 64bit and I have to select HDD not detect it.

I don’t know what to do

How are you trying to install Operating System? Can you try to install operating system using Lifecycle Controller as mentioned in below link

https://www.dell.com/support/kbdoc/en-in/000130160/how-to-install-the-operating-system-on-a-dell-poweredge-server-os-deployment 

Can you also check which storage controller you have on this server. You can refer below link for list of supported storage controllers

https://www.dell.com/support/manuals/en-us/poweredge-t150/pet150_ts_ism_pub/storage-controller-specifications?guid=guid-868287f0-9d4b-4145-8816-40f9905eb02d&lang=en-us 

Hello LuigiEspositoM,

Did you set UEFI as boot mode?

Did you configure the array?

Step 4 and 5 on the link ShineK provided

https://dell.to/3QJLXNQ

#4. Select Configure RAID First or Go Directly to OS Deployment depending on if you have a RAID set up already or not

#5.  If applicable, follow the wizard to set up the RAID disk

You may need to update the Dell OS Driver Pack v.21.10.02, A00

https://dell.to/3QyiZQG

Installation instructions are at the bottom of the page:

Installation

You can update the Driver Pack using Lifecycle Controller.

1. Copy the file to a USB device

2. Plug in the USB device and enter the LifeCycle Controller in POST then select Platform Update

3. Select the Local drive: USB device and navigate through the directory contents to find the executable

4. Launch the executable and follow the instructions provided.

There

Hello,

what are the information you need ? Are you encountering some issue?

Thanks

how did you do this?

@LuigiEspositoM​ hey bro, let me know if your problem has been solve? I have the same issue with this

@LuigiEspositoM​ you install it the both driver bro?