Unsolved
This post is more than 5 years old
1 Message
0
4069
July 29th, 2004 15:00
HIP Compatibility
Is there a version of HIP that is compatible with a PowerEdge 2500SC running Windows 2000 Server?
I want to be able to monitor my enclosure probes as I was able to do when I was running Windows NT Server.
No Events found!
DELL-Mark A
2 Intern
•
2.5K Posts
0
July 29th, 2004 17:00
The HIP program has evolved into the Dell OpenManage Server Administrator.
Dell OpenManage Server Administrator and Remote Install (Agent), 2000, 2003, v.1.8, A00
FileName: om38_win_managed_systemA00.exe [194 MB]
Dell OpenManage Software Forum
This program requires the latest firmware / drivers on the PowerEdge 2500:
Dell Server System BIOS, PowerEdge 2500 / 2500SC, A07
FileName: 2500-A07.exe [520 KB]
Dell ESM Firmware, PowerEdge 2500 / 2500SC, A54
Filename: a54cust.exe (405 KB)
Note: Extract the files to a DOS bootable floppy disk. Boot the server to this floppy disk, and run smflsh.exe.
If you have the optional Perc 3/di:
Adaptec Perc 2/si, 2/qc, 3/si, 3/di, Driver, Windows 2000, v.2.8.0.6085, A15
FileName: W2K-2806085.exe [259 KB]
Adaptec PERC3/Di Firmware, PowerEdge 2500 / 2500SC, PowerVault 750N, v.2.8.0.6089, A08
FileName: PE2500-280_6089.exe [1 MB]
Thanks for using the Dell Community Forums!
Message Edited by DELL-Mark A on 07-29-2004 01:34 PM