connect two disks (identical, or of the same size if not same brand|model) into one Linux system, boot it up and run dd tool, or dd_rescue if one has few data|sectors errors.
ASPI8DOS.SYS - Adaptec 7880 family ASPI driver ASPI8U2.SYS - Adaptec 7890 family ASPI driver ELITEAPI.SYS - Adaptec Perc 2/qc, Perc 2/Si, Perc 3/Si, Perc 3/Di ASPI driver MEGASPI2.SYS - AMI Perc 4/DI MEGASPI6.SYS - AMI Perc II, Perc 2/sc, Perc 2/dc MEGASPI9.SYS - AMI Perc 3/sc, Perc 3/dc, Perc 3/dcl, Perc 3/qc
Then you add in an IDE drive on a PCI controller with its own bios. Or a scsi controller that has dos drivers.
OR
You make a boot disk and map a drive on a peer or server.
pieceOfJunk
1 Message
0
June 18th, 2005 05:00
Quite simple,
connect two disks (identical, or of the same size if not same brand|model) into one Linux system, boot it up and run dd tool, or dd_rescue if one has few data|sectors errors.
speedstep
9 Legend
•
47K Posts
0
June 18th, 2005 23:00
Ghost and the Elite diags disk.
Dell Elite Hard Drive Diagnostics, Diagnostics, MS-DOS, 5.30.00
FileName: BR61011.exe [953 KB]
Release Date: 6/10/2003
http://support.dell.com/FileLib/Format.aspx?ReleaseID=R61011
ASPI8DOS.SYS - Adaptec 7880 family ASPI driver
ASPI8U2.SYS - Adaptec 7890 family ASPI driver
ELITEAPI.SYS - Adaptec Perc 2/qc, Perc 2/Si, Perc 3/Si, Perc 3/Di ASPI driver
MEGASPI2.SYS - AMI Perc 4/DI
MEGASPI6.SYS - AMI Perc II, Perc 2/sc, Perc 2/dc
MEGASPI9.SYS - AMI Perc 3/sc, Perc 3/dc, Perc 3/dcl, Perc 3/qc
Then you add in an IDE drive on a PCI controller with its own bios. Or a scsi controller that has dos drivers.
OR
You make a boot disk and map a drive on a peer or server.