If you don't see option Make Team when click right button mouse on TEAMS, then run Broadcom Manager with admin rights (from installed program, not from systray).
I configured 2 PE1950 and 2 PER300 and they all have the same issue. In Broadcom Advanced Control Suite, there is no option for teaming. I read the documentation which directs you to view menu but there is absolutely nothing. I believe the issue is with the BACS software and not anything else because the option is just not there. If there was anything else, the option would be there but disabled. In Tools|Options, both teaming options are greyed.
I haven't found any similar articles with similar problems on the Net. Please advice.
I get the same window - it has TEAM but there is no way to assign the adapters that are in the unassigned group. How do you assign them...right click doesn't work...there is no create button...
at5147
884 Posts
2
December 13th, 2008 17:00
Go into add/remove programs and modify the current installation of BACS and include all options.
usmartola
1 Message
0
August 16th, 2014 20:00
In BACS4 you just need to select Team View, from the drop down list, in Filter.
awans
1 Message
3
April 11th, 2017 02:00
If you don't see option Make Team when click right button mouse on TEAMS, then run Broadcom Manager with admin rights (from installed program, not from systray).
somms
623 Posts
0
December 13th, 2008 13:00
http://en.community.dell.com/wikis/networking_internet_wireless/802-11a-amp-802-11b-g-draft-n-smart-load-balance-and-failover-channel-bonding-using-dual-wlan-mini-pcie.aspx
AFAIK, as long as your NIC adapters are identified as Broadcom the latest BACS version should allow for teaming...
Nickarie1013
1 Message
1
September 14th, 2015 14:00
work for me.. default didn't install all options
kelloggfan05
1 Message
0
April 8th, 2017 14:00
I get the same window - it has TEAM but there is no way to assign the adapters that are in the unassigned group. How do you assign them...right click doesn't work...there is no create button...
Tony.Madrigal
1 Message
0
October 11th, 2019 13:00
Thank for posting this helped a lot. The path on server 2019 is listed below. Right click and Run as Admin.
C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Broadcom