Unsolved
This post is more than 5 years old
1 Message
0
8715
April 28th, 2004 22:00
PE2400 bios/firmware updates for win 2003 server
I am doing a clean install of Win 2003 Server on a PE2400. The following are my current drivers/firmware/bios versions:
BIOS A08
Embedded Server Mgmt firmware v 5.39
System Backplane firmware v 5.47
PERC 2/SI BIOS v 2.7-0 build 3552
Adaptec AIC-7880 SCSI BIOS v 25701
Archive Python 04106-xxx firmware 7350
Maxtor Ultra ATA 100 Controller BIOS v 2.01 build 27
Intel 8255x based PCI Ethernet (10/100)
Please advise as to what updates are necessary prior to and after the installation of Win2003 Server.
TIA,
Randy Daddis
0 events found
No Events found!
bigbad29b
5 Posts
0
May 1st, 2004 16:00
sabasigh
12 Posts
0
May 20th, 2004 04:00
bigbad29b...do you get AFAMGT errors in the Event Log regarding SCSI timeouts?
bigbad29b
5 Posts
0
May 20th, 2004 23:00
My install was a clean format and install. Before I flashed the BIOS the installation would blue screen at different spots. I flashed it then retried the install and it worked like a champ. I don't have any errors logged in the event log that you asked about.