Also keep in mind that if using the onboard PERC 4/Di RAID controller, you MUST configure RAID before any drives can be seen, even with the right driver (which, as Chris said, NT was not supported on this machine, so there are no specific drivers for NT).
DELL-Chris H
Moderator
•
9.7K Posts
0
August 29th, 2012 07:00
BGStricker,
This is the earliest driver we have for the 2600, which is for 2k.
Driver - www.dell.com/.../poweredge-xeo2600
You can also try to use the Installation and Server Mgmt ISO, boot to this and see if it allows you to proceed.
www.dell.com/.../poweredge-xeo2600
theflash1932
9 Legend
•
16.3K Posts
0
August 29th, 2012 11:00
Also keep in mind that if using the onboard PERC 4/Di RAID controller, you MUST configure RAID before any drives can be seen, even with the right driver (which, as Chris said, NT was not supported on this machine, so there are no specific drivers for NT).