This post is more than 5 years old
2 Posts
0
37286
August 22nd, 2014 11:00
Recovery Partition
Hi Everyone,
it seem there might be a factory recovery partition on this server but I can't access it. the server is a T310 power edge.
I tried F8 repair option but did not get a factory recovery option.
any ideas?
thanks
Danny
No Events found!
theflash1932
11 Legend
•
16.3K Posts
0
August 22nd, 2014 11:00
If doing a custom install, delete ALL existing partitions before installing.
partition 1 is OEM reserved 39MB - DELL DIAGNOSTICS
partition 2 is Recovery 3 GB - OEM WINRE PARTITION - STARTUP FILES, REPAIR OPTIONS, BITLOCKER, ETC.
partition 3 is OS 40 GB - OS PARTITION
partition 4 is datapart1 442 GB - DATA PARTITION
theflash1932
11 Legend
•
16.3K Posts
0
August 22nd, 2014 11:00
Servers don't come with "recovery partitions". What you are seeing is most likely the Windows "Recovery Environment" (WinRE). If you need to reinstall the OS, you will need the OS installation media.
1redred
2 Posts
0
August 22nd, 2014 11:00
Thanks for the reply.
There is a 3gb recovery partition when I load up the OS install disk and get to the point where I choose custom install. it shows all partitions.
partition 1 is OEM reserved 39MB
partition 2 is Recovery 3 GB
partition 3 is OS 40 GB
partition 4 is datapart1 442 GB
I always thought that the Windows recovery was kept on the OS partition, I did not know it could be kept on a separate partition.
if that is the case as you suggest then could I restore to the first recovery point before any other software was installed?
thanks again
Danny