It wont detect the hard drive because F6 drivers are not on the CD.  That is what the server assistant DVD is for.  There isn't one size fits all for this disc it entirely depends on the model of server.

Using Dell OpenManage Server Assistant 8

To stay updated with the latest Dell OpenManage software releases, enroll in the Dell OpenManage Subscription Service. Visit http://www.dell.com/openmanagefor more information

 11/7/2006 10:12 AM    112721920 om_3.1.1_doc_sc_a00.iso
 11/7/2006 10:12 AM 413880320 om_3.1.1_dsa_sc_a00.iso
 9/28/2006 9:54 AM 432766976 om_3.1_doc_sc_a00.iso
 9/28/2006 9:54 AM 701329408 om_3.1_dsa_sc_a00.iso
 4/10/2007 12:08 PM 397574144 om_3.2.0_doc_a00.iso
 4/10/2007 12:08 PM 537878528 om_3.2.0_dsa_a00.iso
 4/14/2006 3:24 PM 671580160 om_4.5.0.1_suu_a00.iso
 5/3/2006 11:10 AM 229539840 om_4.5.1_doc_a00.iso
 5/3/2006 10:57 AM 496631808 om_4.5.1_ism_a00.iso
 5/3/2006 11:27 AM 280119296 om_4.5.1_sdu_a00.iso
 5/3/2006 10:59 AM 222003200 om_4.5.1_smc_a00.iso

You can obtain many of the NEW SERVER  ISOs from http://ftp.dell.com/sysman

DELL OpenManage Server Assistant 6.4 CD set works with Dell PowerEdge 300, 350, 1300, 1400, 1550, 2300, 2400, 2450, 2500, 2550, 4300, 4350, 4400, 6300, 6350, 6400, 6450, and 8450 Systems. P/N 0703DX  Rev. A02.

Systems
PowerEdge 1300
PowerEdge 1400 / 1400SC
PowerEdge 1500SC
PowerEdge 1550
PowerEdge 1600SC
PowerEdge 1650
PowerEdge 1655MC
PowerEdge 1750
PowerEdge 2300
PowerEdge 2400
PowerEdge 2450
PowerEdge 2500 / 2500SC
PowerEdge 2550
PowerEdge 2600
PowerEdge 2650
PowerEdge 300 / 300SC
PowerEdge 350
PowerEdge 4300
PowerEdge 4350
PowerEdge 4400
PowerEdge 4600
PowerEdge 500SC
PowerEdge 600SC
PowerEdge 6300
PowerEdge 6350
PowerEdge 6400
PowerEdge 6450
PowerEdge 650
PowerEdge 6600
PowerEdge 6650
PowerEdge 8450
Operating Systems
Microsoft Windows 2000
Microsoft Windows Server 2003

Perc 5/i integrated. We have a Dell PowerEdge 2950 Server. I was able to Download the driver but it comes in .exe file format. How do we go about making the SCSI Adapter driver bootable? We don't have the server assistant CD, so we have to use the MICROSOFT OEM CD instead, which requires the SCSI Adapter driver to be installed first.

Thanks.

What model server is this?
Which RAID controller is installed?

You can extract the files from the EXE using the /extract switch or you can just use the "Hard Drive" (ZPE) version:

http://downloads.dell.com/FOLDER97902M/6/DELL_MULTI-DEVICE_A07_R211424.exe

You must run this file on any Windows system to extract its contents before use.  You can put the files on a floppy disk to load at the F6 prompt, or you can use nLiteOS.com to integrate the drivers into your installation media (will create a new CD/ISO to install with).

Keep in mind that the PERC does NOT support non-RAID, so you MUST first configure (AND Initialize) RAID in the CTRL-R utility, or no drives will be seen for the install even with the correct drivers.

If you want to use the installation utility, you can download it here:

http://www.dell.com/support/home/us/en/04/Drivers/DriversDetails?driverId=PYKGK&fileId=3365348005&osCode=WX64&productCode=poweredge-2950&languageCode=EN&categoryId=SZ

Boot to SMTD, choose to Install OS, configure RAID (if you have not already done so in the CTRL-R utility), then insert the Windows media when prompted.  Your installation CD for 2003 R2 MUST have SP2 on it, or it will not work with SMTD.

Don't use the Server Assistant ISO's listed above - they are obsolete even for the older models listed.  Use SBUU or SMTD.

Server 2003x64 is supported - see image below (there is no difference between R1 and R2 support). 

Could you please provide a download link to SMTD for Windows Server 2003 R2 x64 Standard Editon. The link that was provide doesn't support the OS I'm looking for.

Thanks.

FYI,

Even though MS Windows 2003 x64 is listed on the supported operating system. There is no option for Windows Server 2003 R2 x64 Standard for this release. I verified it twice. There was only option for Windows Server 2008 and above.

If you could provide me with a version that does have Windows Server 2003 x64 R2 Standard that would be great.

Thanks.

You can try an older version:
http://www.dell.com/support/home/us/en/19/Drivers/DriversDetails?DriverId=68RWT

Don't forget to concatenate the two ISO's before burning it to DVD.

How to do you concatenate the two ISO's? I tried using UltraISO but disc two of the ISO image doesn't open. It is saying unknown file format when I try to open it.

Thanks.