This post is more than 5 years old
278 Posts
0
2307
Does someone have the exact steps regarding the installation of PP/VE?
I would like to install PP/VE with temporary licenses on a new ESX host.
Does someone has the exact steps of the installation and which is best or recommended procedure of the PP/VE installation?
Via update manager? Using vapp? via CLI?
Thank you in advance
pawelw1
306 Posts
1
October 14th, 2016 02:00
Hi,
The exact installation/licensing steps are described in PPVE Installation and Administration Guide - you can find this document here:
https://support.emc.com/products/1800_PowerPath-VE-for-VMware/Documentation/
I don't think there is any best way of installing PowerPath - as per documentation, the "recommended" way is via the Update Manager, but I personally always found the CLI method faster and less complicated, so it's really up to you :-)
Hope that helps - let me know if anything is unclear!
Thank you,
Pawel
pawelw1
306 Posts
0
October 14th, 2016 02:00
Hi,
All the installation and licensing steps are in the Install Guide, to my best knowledge there is no separate document for this.
Install Guide is pretty comprehensive (long) - but it's divided into sections and each of them is dedicated to selected installation and licensing method, so it should be very easy to follow - every step is explained in details, with examples.
Give it a go
Cheers,
Pawel
pawelw1
306 Posts
0
October 14th, 2016 02:00
You too - let us know if you're stuck!
Zikas
278 Posts
1
October 14th, 2016 02:00
Pawel thank you so much.
i will give a try and i will see.
Have a good day
Zikas
278 Posts
0
October 14th, 2016 02:00
Hi Pawel,
thank you so much for your quick reply.
So in the installation guide if i will follow the steps i would be able to install the PPVE?
You don't have any document/guide with the specific/exact steps?