Unsolved
This post is more than 5 years old
2 Posts
0
1285
Dell PowerVault 114T Connection with Dell Server
Hello all. In my new job i found an Dell PowerVault 114T with an dell server 2950 both turned of and disconnected.
I need to connect and test but I'm not an expert. All I have is like the picture below.
The server does not have any port for this connector.
Can anyone help?
tapelibraryfixer
1 Rookie
1 Rookie
•
427 Posts
0
October 23rd, 2017 04:00
you want an "adaptec 29320" scsi card possibly PCi-X depending on the slots in your server.
ruku84
2 Posts
0
October 24th, 2017 02:00
This photo is from the back of the server and the LTO. I see in the back of the server there is the slot for
the connector. i tried but now I am on an other issue with the server : failsafe 1000 call support e1216 3.3 v. i will try to fix this after that will be back if there is any question. Thanks
DELL-Sam L
Moderator
Moderator
•
7.1K Posts
0
October 24th, 2017 08:00
Hello ruku84,
So the connector that is in your picture is a LVD SCSI. As tapelibraryfixer stated that you can use a 29320 or 39320 SCSI card that can connect to your PV114T. Now you want to make sure that you don’t connect your PV114T to a PERC raid controller as that can cause issues with a PERC card.
Please let us know if you have any other questions.