Unsolved
This post is more than 5 years old
3 Posts
0
7762
Help with PowerVault 200S Enclosure Module
I have a PowerVault 201s and I am setting up a cluster configuration using two servers running w2003 Enterprise.
I am having difficulty identifying the jumper settings for the modules. The modules look different to those in the manual. So wondering if anyone has any ideas regarding identifying the models and jumper settings for a cluster.
A white sticker with a bar code on the face of the module has a P/N PCA-500500 Rev 1.1
An orange sticker next to the scsi interface says:
One card:
DP/N0003065E- 13260- 983-A965
Rev. A00
Second card:
DP/N0003065E- 13260- 96U-A799
Rev. A00
Any ideas where i might be able to track this info down?
B_Segurson
107 Posts
0
September 25th, 2005 00:00
tommo666
1 Rookie
1 Rookie
•
1.2K Posts
0
September 26th, 2005 18:00
Here you go,
If the PV2xxS is intended to be used in a Microsoft cluster configuration, in which two servers are sharing the PV2xxS, two things are required in order for the configuration to work.
There is much more that is required to create a Microsoft cluster, but these are the only two parameters on the PV2xxS that must be configured or changed in order to support clustering
yellowpark
3 Posts
0
September 27th, 2005 16:00
yellowpark
3 Posts
0
September 27th, 2005 16:00