Unsolved
This post is more than 5 years old
3 Posts
0
32138
MD3000 Operation In Progress | Add Physical Disk in Progress
Working on an MD3000 storage for a 2x R710 cluster.
Have one disk group that contained 10 physical 450GB disks and 2 virtual disks. Added an 11th physical disk and it showed up fine as available capacity.
The problem is now it is several days (4-5 days?) it is still in the same state of Operation In Progress >> Add Physical Disk in Progress and not going anywhere and I cannot back out either.
I removed the servers, restarted MD 3000 and even tried to swap the disk that I added with another disk (and swapped back again to original disk). Now the red light is on with MDSM message of Degraded Virtual Disk.
I am at a point where I must stop and start over again (even if I have to delete all virtual disks).
Dev Mgr
4 Operator
4 Operator
•
9.3K Posts
0
February 3rd, 2013 20:00
Try the command in my post from 2009-03-23 in this thread:
en.community.dell.com/.../19452604.aspx