The cable assembly does have standard connectors, but its configuration is not common. The standard splitter cable has one male and 2 female connectors, however the Dell assembly has 3 female connectors.
It might work if you made sure the male connector was covered properly, but I have not tried and it has not been tested by Dell. "Officially" I cannot recommend it.
DELL-Mark A
2 Intern
•
2.5K Posts
0
January 16th, 2004 16:00
Hi,
The cable assembly does have standard connectors, but its configuration is not common. The standard splitter cable has one male and 2 female connectors, however the Dell assembly has 3 female connectors.
DELL-Mark A
2 Intern
•
2.5K Posts
0
January 16th, 2004 16:00
Hi,
The PowerEdge 2600 uses this power cable 310-3402 for tape drives or the optional 1x2 backplane. The cable actually connects to a connector labeled 1x2 on the Scsi backplane as shown on this graphic:
http://docs.us.dell.com/docs/systems/pe2600/en/sm/remove.htm#1101956
Dell spare parts can be reached by phone at 1-800-357-3355.
tanaka99
4 Posts
0
January 16th, 2004 16:00
Is this a standard connector or do I need to order one from Dell directly? I mean, is it one of these:
http://www.startech.com/ststore/itemdetail.cfm?product_id=PYO2SL&topbar=topbara.htm
Message Edited by tanaka99 on 01-16-2004 12:59 PM
tanaka99
4 Posts
0
January 16th, 2004 17:00
tanaka99
4 Posts
0
January 16th, 2004 17:00
Thanks ... good sell. I'm calling spare parts now. Hope this helps any quotas.
DELL-Mark A
2 Intern
•
2.5K Posts
0
January 16th, 2004 17:00