Unsolved
This post is more than 5 years old
5 Posts
0
9719
April 2nd, 2005 20:00
PV100 and flexbackup
I have a PV100 Dat on a 2600 (Tag 9QFNG1J), 24/7 in 4 hour, but before ask the assistance i'd like to know if I can solve the problem my myself.
Operating system: e-smith server.
My errore sounds like this one:
http://contribs.org/modules/pbboard/viewtopic.php?t=23398
I tried to lanch flexbackup -test-tape-drive and i got FAILURE! Problem with tape driver or parameters.
Tried to change $blksize, $pad_blocks, or $mt_blksize, turn buffering off, but still got I/O error.
That's a failure of the dat ir my fault?
The tape I insered into the dat is a new dell tape.
This is my try to sep-up that dat, so it has never worked before.
Thanks
Romeo
Operating system: e-smith server.
My errore sounds like this one:
http://contribs.org/modules/pbboard/viewtopic.php?t=23398
I tried to lanch flexbackup -test-tape-drive and i got FAILURE! Problem with tape driver or parameters.
Tried to change $blksize, $pad_blocks, or $mt_blksize, turn buffering off, but still got I/O error.
That's a failure of the dat ir my fault?
The tape I insered into the dat is a new dell tape.
This is my try to sep-up that dat, so it has never worked before.
Thanks
Romeo
0 events found
No Events found!
romeob
5 Posts
0
April 2nd, 2005 21:00
flexbackup -newtape
Apr 3 01:08:55 xxxxxx kernel: (scsi0:A:6:0): parity error detected in Data-in phase. SEQADDR(0x1a3) SCSIRATE(0x93)
Apr 3 01:08:55 xxxxxx kernel: scsi0:A:6: Missed busfree. Lastphase = 0xe0, Curphase = 0x0
Apr 3 01:08:55 xxxxxx kernel: (scsi0:A:6:0): parity error detected in Data-in phase. SEQADDR(0x1a2) SCSIRATE(0x93)
Apr 3 01:08:55 xxxxxx kernel: scsi0:A:6: Missed busfree. Lastphase = 0xe0, Curphase = 0x0
Apr 3 01:08:55 xxxxxx kernel: (scsi0:A:6:0): parity error detected in Data-in phase. SEQADDR(0x1a2) SCSIRATE(0x93)
Apr 3 01:08:55 xxxxxx kernel: scsi0:A:6: Missed busfree. Lastphase = 0xe0, Curphase = 0x0
Apr 3 01:08:55 xxxxxx kernel: (scsi0:A:6:0): parity error detected in Data-in phase. SEQADDR(0x1a2) SCSIRATE(0x93)
Apr 3 01:08:55 xxxxxx kernel: scsi0:A:6: Missed busfree. Lastphase = 0xe0, Curphase = 0x0
Apr 3 01:08:55 xxxxxx kernel: (scsi0:A:6:0): parity error detected in Data-in phase. SEQADDR(0x1a2) SCSIRATE(0x93)
Apr 3 01:08:55 xxxxxx kernel: scsi0:A:6: Missed busfree. Lastphase = 0xe0, Curphase = 0x0
Apr 3 01:08:55 xxxxxx kernel: st0: Error with sense data: Current st09:00: sense key Aborted Command
Apr 3 01:08:55 xxxxxx kernel: Additional sense indicates Data phase error
romeob
5 Posts
0
April 2nd, 2005 22:00
Oh, and we only got the PV100T to work by changing the SCSI setting to "narrow".
What that it means? Is a software setting, a bios setting or an hardware setting?
Have I do reboot and access to the bios? Have i to take the server off??
romeob
5 Posts
0
April 15th, 2005 23:00
I'm the only one in the work who is not able to make a PV100 works with linux?