Unsolved
This post is more than 5 years old
1 Message
0
745726
PowerVault 124T Username/Password
Hello,
I have a PowerVault 124T autoloader and I cannot log into through the web console.
I have spoken with others and they do not remember setting the password.
What is the default username and password for the 124T through the web console?
Thanks,
Carsen
tapelibraryfixer
1 Rookie
1 Rookie
•
427 Posts
0
April 3rd, 2019 08:00
password = 7946
Notocaboton
1 Message
0
April 4th, 2019 11:00
Hello, could you please help me with my PowerVault 124T?
The number is **41833**
Thank you in advance!
DELL-Sam L
Moderator
Moderator
•
7.1K Posts
0
April 4th, 2019 13:00
Hello Notocaboton,
I will send you a private message with your temp password.
Please let us know if you have any other questions.
Gregory B.
3 Posts
0
June 18th, 2019 11:00
Hi Sam,
I'm also needing to get into my PowerVault 124-T. I see no asterisks on my splash page, but I do have the following:
PV-124T
S/N:CJ4HBC0199
Cust S/N: BU1432BHP0019
LTO-6
S/N:10WT009287
EDIT: Thanks to another thread, I was informed to use Internet Explorer. Now I see the asterisks and 5-digit code:
** 34077 **
Can you help me with a password to access my PV? We're needing to update the firmware due to tape-eject issues.
tapelibraryfixer
1 Rookie
1 Rookie
•
427 Posts
0
June 19th, 2019 00:00
username - fa
password - c19
But i doubt a firmware update will fix the eject issues.
Gregory B.
3 Posts
0
June 19th, 2019 13:00
Hi tapelibraryfixer,
Thanks all the same! Will give it a try, as we've had a few minor issues with the unit.
Sincerely,
Greg
EDIT: After I performed the firmware update, I'm getting prompted for a new password. Code this time is ** 63011 **. Can you please provide the credentials?
tapelibraryfixer
1 Rookie
1 Rookie
•
427 Posts
1
June 20th, 2019 00:00
password = 7f27
Gregory B.
3 Posts
0
June 20th, 2019 09:00
Thank you for all of your support and prompt responses.
My code seems to have changed this morning to ** 53504 **.
That may've been because I had to reboot the PowerVault yesterday after the f/w update. Will the code continue to change at reboot?
Thanks!
Greg
tapelibraryfixer
1 Rookie
1 Rookie
•
427 Posts
1
June 20th, 2019 09:00
5804
The number always changes especially on a reboot
NeoJamie
1 Message
0
June 28th, 2019 02:00
Hi, i'm having this issue too, could you provide me with a temporary password please
The number is **34662**
Thanks.
tapelibraryfixer
1 Rookie
1 Rookie
•
427 Posts
0
June 28th, 2019 04:00
Username - fa
password - e62
PeterPiotrPer
1 Message
0
July 2nd, 2019 14:00
Good afternoon,
I have to include myself in this issue. The realm for the 124T is 42310
Thank you in advance,
Peter
tapelibraryfixer
1 Rookie
1 Rookie
•
427 Posts
0
July 3rd, 2019 00:00
username - fa
password - 2c42
stallion_tek
2 Posts
0
October 16th, 2019 20:00
Correction, my "realm" number is **60192**
stallion_tek
2 Posts
0
October 16th, 2019 20:00
I would think there is an easier way by now, I have the same problem. I can get into the LCD but not the remote web utility, my real number is **60192**
Thanks in advance!