Unsolved
This post is more than 5 years old
53 Posts
0
3888
December 2nd, 2005 04:00
Remote Desktop
PV725N, W2K Powered By Windows Default OS.
I can access NAS Appliance remotely via terminal services (port 1279) or even RDP via 3389.
Router has ports forwarded to fixed IP of NAS, all works, non-issue.
However, 4 XP Pro clients on subnet (192.168.1.XXX), all have RDP enabled
as well as XP firewall enabled to allow Remote Desktop (RDP).
Each client has RDP Port changed (registry modification & reboot) to allow connections.
Router is enabled to allow forwarding of each associated port to each IP of each client.
(ie.:)
Server=192.168.1.110 RDP Port =3389 (Powervault 725N)
PC-001=192.168.1.109 RDP Port =3390
PC-002=192.168.1.108 RDP Port =3391
PC-003=192.168.1.107 RDP Port =3392
PC-004=192.168.1.106 RDP Port =3393
I cannot access any client remotely. (only NAS Appliance)
I have very similar setup at another location, all works, however, server is W2003, not W2K/NAS Appliance.
Is something specific to the whole big picture with the NAS on the network, running all the services by default (like terminal services) having any type of effect on my inability to connect to the clients remotely, or is all of that a non issue.
Did I try to connect when onsite via locally (internal IP), yes, and works.
Linksys WRT54G router
May not be the appropiate question for this forum, however, I want to be clear that there is no involvement of the Powervault 725N causing any of the issues.
Anyone?
I can access NAS Appliance remotely via terminal services (port 1279) or even RDP via 3389.
Router has ports forwarded to fixed IP of NAS, all works, non-issue.
However, 4 XP Pro clients on subnet (192.168.1.XXX), all have RDP enabled
as well as XP firewall enabled to allow Remote Desktop (RDP).
Each client has RDP Port changed (registry modification & reboot) to allow connections.
Router is enabled to allow forwarding of each associated port to each IP of each client.
(ie.:)
Server=192.168.1.110 RDP Port =3389 (Powervault 725N)
PC-001=192.168.1.109 RDP Port =3390
PC-002=192.168.1.108 RDP Port =3391
PC-003=192.168.1.107 RDP Port =3392
PC-004=192.168.1.106 RDP Port =3393
I cannot access any client remotely. (only NAS Appliance)
I have very similar setup at another location, all works, however, server is W2003, not W2K/NAS Appliance.
Is something specific to the whole big picture with the NAS on the network, running all the services by default (like terminal services) having any type of effect on my inability to connect to the clients remotely, or is all of that a non issue.
Did I try to connect when onsite via locally (internal IP), yes, and works.
Linksys WRT54G router
May not be the appropiate question for this forum, however, I want to be clear that there is no involvement of the Powervault 725N causing any of the issues.
Anyone?
No Events found!
Bezalel
175 Posts
0
December 2nd, 2005 15:00
Guruuno
53 Posts
0
December 2nd, 2005 18:00
So, what you are saying is to change/modify/or create a new rule in the Windows Firewall for the RDP to match each port as referenced?
Thanks