This post is more than 5 years old
4 Posts
0
744
July 3rd, 2019 11:00
I need to rebuild a R620 but I see the Raid Array when I start the OS rebuild but it doesn't show high i/o drive.
The question I have will the operating system see that 1tb high I/O drive after it is rebuilt.
No Events found!
theflash1932
11 Legend
•
16.3K Posts
1
July 3rd, 2019 13:00
k038013
4 Posts
0
July 3rd, 2019 11:00
It is a 785 GB ioDrive2 MLC PCIe Solid State Storage Card
theflash1932
11 Legend
•
16.3K Posts
0
July 3rd, 2019 12:00
Use the Hard Drive version of the driver below, extract contents and put it on the installation USB:
https://www.dell.com/support/home/us/en/04/drivers/driversdetails?driverid=8jm71&oscode=w12r2&productcode=poweredge-r620
Driver above is for Server 2012 R2 and may be different for a different OS ... which OS are you installing?
k038013
4 Posts
0
July 3rd, 2019 12:00
And this can be done after the OS is installed?
k038013
4 Posts
0
July 3rd, 2019 12:00
Server 2012 R2