Unsolved
This post is more than 5 years old
2 Posts
0
2772
R220 Ram upgrade
Try to update my Dell PowerEdge R220 with new RAM.
Got 4x Kingston KVR16LN11/8 (8GB PC3L - 12800 CL11 240-Pin UDIMM)
But my Server doensÄt even boot with them. Dont see any message from the bios.
I think the Ram are ok with the specs.
Does someone have a idea?
thx
chris
chrismaster
2 Posts
0
January 16th, 2018 07:00
System Model Name PowerEdge R220
System Bios Version 1.1.4
System CPLD Version 100
Dev Mgr
4 Operator
4 Operator
•
9.3K Posts
0
January 23rd, 2018 18:00
When I check the memory specs on the Kingston site, the link showing which systems this memory works with does not list the R220.
It is most likely because that memory is non-ECC. The Xeon processor in the R220 may support non-ECC memory, but I'm not sure the BIOS in that server will.