Unsolved
This post is more than 5 years old
2 Posts
0
717
October 31st, 2019 05:00
Remote time setting for iDRAC PowerEdge R210 II
I can’t change the time remotely to iDRAC. I did not find an item in the web interface where I can change the time and set the web iDRAC. Through racadm the command is not perceived.
iDRAC Information 2.90 (Build 04)
0 events found
No Events found!
Daniel My
12 Elder
•
6.2K Posts
0
October 31st, 2019 10:00
Hello
setractime is a CMC command, it does not work on the iDRAC.
Shine provided additional information in this thread:
https://www.dell.com/community/Systems-Management-General/iDRAC6-1-92-racadm-setractime/td-p/4071021
Thanks
engineer UCS service
2 Posts
0
November 1st, 2019 07:00
Well, if "So if you want to set iDRAC6 time set the BIOS time accordingly and wait for 1 hour or perform racreset", then the BIOS time can be adjusted remotely or only locally on the server itself?
Daniel My
12 Elder
•
6.2K Posts
0
November 1st, 2019 10:00
I was unable to find a way to set the BIOS time without going into system setup.