Skip to main content
Start a Conversation

Unsolved

This post is more than 5 years old

wsug22

1 Message

5367

November 10th, 2006 13:00

VersaRail specs

Hi,

I'm not familiar with VersaRails for a 2950 and was unable to find the specifications for them on the Dell site, more specifically relating to the minimum depth of the Rack required.

I've had issues with Rapid rails in the past that have a minimum depth of 28 3/8".

Any help would be appreciated

Scott

RackSolutions

171 Posts

November 10th, 2006 20:00

The PE2950 uses the new combination rail kit which has both Rapid Rail and Versa Rail attachments.  The installation depth range of this rail kit is:27" to 29.5"  This is not the physical depth of the entire assembly this is only the installation depth range of the rails.  There are two 3rd Party Rail kits available for the PE2950.  The Dell SKU for the non-ball bearing slide kit is:A0705182  The ball bearing slide kit is:A0741949.  Your Dell Account Rep. can order these products for you.
 
Please don't hesitate to contact me if I can be of further assistance.
Will Beene
903-453-0835

Was this post helpful?

View All

Top