If you want to rate limit all of the RPA communication you will have to effectively limit all CGs that you create on all the RPAs to 10Mb like it sounds like you are planning. If you only do this first CG and do not do the future ones.....they will try to consume the additional bandwidth while only your first CG is limited to 10Mb. So basically it is an all or nothing limit across all CGs on the RPAs to limit the aggregate RP limit at a network level.
echolaughmk
2 Intern
•
522 Posts
0
February 20th, 2015 10:00
Hi,
If you want to rate limit all of the RPA communication you will have to effectively limit all CGs that you create on all the RPAs to 10Mb like it sounds like you are planning. If you only do this first CG and do not do the future ones.....they will try to consume the additional bandwidth while only your first CG is limited to 10Mb. So basically it is an all or nothing limit across all CGs on the RPAs to limit the aggregate RP limit at a network level.
HTH,
-Keith