Unsolved
This post is more than 5 years old
3 Posts
1
10082
Sata power and mini 6-pin
I bought a Dell Inspiron Desktop 3668 i7-7700 with a 1tb hard drive. I would like to add a second and a third hard drive into the two open 2.5" bays. The problem is finding a mini 6-pin (on the motherboard) connector to the Sata power on the hard drive.
the part number that's on the FACTORY installed hard drive/ odd is DP/N 0KC81G. The ODD is even a smaller connector. I would like a y connector that has two SATA power connectors to the min 6-pin
Does anyone know where I can purchase one?
ejn63
9 Legend
9 Legend
•
87.5K Posts
1
July 22nd, 2017 05:00
www.newegg.com/.../Product.aspx for the connector to the board; then use a SATA splitter.
www.amazon.com/.../
wpfader
3 Posts
0
July 22nd, 2017 08:00
Looks like it will work
JCEllis
4 Posts
0
January 27th, 2018 09:00
Will this approach work on adding a Rosewill PCI-E to USB 3.0, 4-Port PCI Express Expansion Card, PCIe Card, 4 USB 3.0 Ports. It has a power augmentation cord with 4 pins that is supposed to plug into the SATA supply I think. Where would I plug in this cord. Would the mini 6-pin splitter approach work?