Unsolved
This post is more than 5 years old
11 Posts
0
4484
Strange Happenings
I took the SATA hard drives out and put an old IDE hard drive in. The BIOS recognized it and all I had to do was to reinstall the Operating System.
How do I go back to the Serial ATA drives which are much larger. The old Hard Drive is 40 GB and the the Serial hard drives are 120 and 160.
Any help would be appreciated. Also thanks for all your help - I have tried everything suggested and it has really been helpful.
Also, If I am not using the RAID should the BIOS be set to RAID off?
WT
Shadow84
18 Posts
0
December 5th, 2004 20:00