Unsolved
This post is more than 5 years old
1 Message
0
946
November 4th, 2010 06:00
Fan in Fan out Vmax ?
Hi,I was wondering where I can find some figures and best practices about the fan in /fan out of the Vmax FC directors. Howmany hosts can I connect on a single Fibre port i.e. .. Thanks, Hans
No Events found!
dynamox
11 Legend
•
20.4K Posts
•
87.4K Points
0
November 4th, 2010 06:00
https://community.emc.com/message/501770
.
Quincy561
1.3K Posts
0
November 5th, 2010 02:00
IMHO, it isn't as simple as one maximum number, but the performance requirements should be considered as well. You could attach one very demanding host to a FA port or CPU and not have much left over for any other workloads. Or you could attach hundreds of fairly idle hosts and have plenty of performance in the FA left.
xe2sdc
6 Operator
•
2.8K Posts
0
November 5th, 2010 04:00
"Vacuuming roofs" ... ROTFL :-)
Something nobody (apart you) may even understand, unless I place a couple of pictures in my blog... I think I'll provide evidences of what you stated ;-)
xe2sdc
6 Operator
•
2.8K Posts
0
November 5th, 2010 04:00
As usual, when it comes to performances, the right answer is "It depends" ;-)
I agree on every single word, Quincy :-)
RRR
6 Operator
•
5.7K Posts
0
November 5th, 2010 04:00
Mister "it depends" is back !!! Where have you been ? Vacuuming roofs in the area ?
Nollaig1
1 Rookie
•
137 Posts
0
November 5th, 2010 04:00
Hello,
Knowledgebase article emc239025 should help.
Regards,
Nollaig