If you are a EMC employee or partner, then you can run a disk hardware report from Procedure Wizard.
This will list all Disk with the P/N and S/N of each.
Forum Reminder:
If you find any of the replies to your question as helpful, please be so kind as to mark replies as being "helpful" or "answered". This helps us track our success with the Forum.
Booyah2
2 Intern
•
185 Posts
0
March 17th, 2011 09:00
The number 101-000-052is the EMC part number.
I searched above P/N in logistics and found it to be a 15k 146G disk drive.
Hope this helps!
hoa2
7 Posts
0
March 17th, 2011 10:00
Hello,
101-000-052 is just a simple.
I mean how do I look for EMC PN and SN number?
Example: PN = xxx-xxx-xxx and SN = xxxx-xxxx-xxxx (where x is a number)
I can find SN for the old hard drive via Inline command.
I know I cannot used Inline command to look for PN and SN number above.
Booyah2
2 Intern
•
185 Posts
0
March 17th, 2011 11:00
I cannot train you for this. You need to get EMC certified training from appropriate training sources.
hoa2
7 Posts
0
March 17th, 2011 11:00
Hello
How do I run a disk report from a symmetrix machine?
Booyah2
2 Intern
•
185 Posts
0
March 17th, 2011 11:00
If you are a EMC employee or partner, then you can run a disk hardware report from Procedure Wizard.
This will list all Disk with the P/N and S/N of each.
Forum Reminder:
If you find any of the replies to your question as helpful, please be so kind as to mark replies as being "helpful" or "answered". This helps us track our success with the Forum.