Unsolved
This post is more than 5 years old
9 Posts
0
911
Issue with powerpath on windows server
I have one path dead on one of our windows servers.We have powerpath version 5.2 and windows 2003 SP2.
Please help me in recovering the dead path.
Unsolved
This post is more than 5 years old
9 Posts
0
911
I have one path dead on one of our windows servers.We have powerpath version 5.2 and windows 2003 SP2.
Please help me in recovering the dead path.
Top
ifthikar_eb20a3
9 Posts
0
August 2nd, 2011 02:00
Hi Yaminikishore
Appreciate the quick response. I issued powermt check and the dead path got removed. Shall I try issuing powermt check reconfig dev=all command.Hope it is not an intrusive command as it is a production server.
Anonymous
5 Practitioner
5 Practitioner
•
274.2K Posts
0
August 2nd, 2011 02:00
Hi,
Try running the "powermt check" & "powermt cehck reconfig" commands. This should help in restoring the dead paths.
sauravrohilla
859 Posts
0
August 2nd, 2011 03:00
Hi,
You can run the powermt check reconfig with out any issues. If there is an active path and its not showing up in PP, this command should bring it back to configuration. If this does not help then press Windows' favt button "restart"
regards,
Saurabh
ifthikar_eb20a3
9 Posts
0
August 2nd, 2011 04:00
Thanks
vijay861
51 Posts
0
August 2nd, 2011 06:00
Hi Ifthikar,
We faced the same issue 2 days back,
C:\Documents and Settings\eccadmin>powermt display dev=all
Pseudo name=harddisk2
Symmetrix ID=
Logical device ID=02FF
state=alive; policy=SymmOpt; priority=0; queued-IOs=0
==============================================================================
---------------- Host --------------- - Stor - -- I/O Path - -- Stats ---
### HW Path I/O Paths Interf. Mode State Q-IOs Errors
==============================================================================
3 port3\path0\tgt0\lun1 c3t0d1 FA 10bB active alive 0 0
Pseudo name=harddisk3
Symmetrix ID=
Logical device ID=0300
state=alive; policy=SymmOpt; priority=0; queued-IOs=0
==============================================================================
---------------- Host --------------- - Stor - -- I/O Path - -- Stats ---
### HW Path I/O Paths Interf. Mode State Q-IOs Errors
==============================================================================
3 port3\path0\tgt0\lun2 c3t0d2 FA 10bB Dead Dead 0 0
To overcome this we removed the dead path (powermt check) and reconfigured the path(powermt reconfig). No luck, so I have disabled the port on switch and enabled again. It works for me. If this doesn't works for you then reboot will fix this issue.
sauravrohilla
859 Posts
0
August 2nd, 2011 09:00
Hi Vijay / Ifthikar,
If the path is dead and is not coming online on its own even after powermt check reconfig, I would request you to open a ticket with support and provide them the emcreports before you reboot the host. It would enable us to have some information about the problem as we are trying to find out the cause why the path went down and why the PP driver did not bring it up?
regards,
Saurabh
ifthikar_eb20a3
9 Posts
0
August 2nd, 2011 22:00
Thanks Vijay and Saurabh