Unsolved
This post is more than 5 years old
19 Posts
0
1564
Queued IO in powerpath clarification
Hello,
I had a quick questions on the Q-IO value seen in powerpath. Is this value the number of IO's that are queued above the HBA queue depth? In the example below, do the 16 and 18 queued io's suggest that I need to increase my hba queue depth, or are they just in transit to the frame, and as long as they are under the hba depth we are fine? Thanks!
Symmetrix logical device count=36
CLARiiON logical device count=0
Hitachi logical device count=0
Invista logical device count=0
HP xp logical device count=0
Ess logical device count=0
HP HSx logical device count=0
==============================================================================
----- Host Bus Adapters --------- ------ I/O Paths ----- ------ Stats ------
### HW Path Summary Total Dead IO/Sec Q-IOs Errors
==============================================================================
0 fscsi0 optimal 36 0 944 16 0
1 fscsi1 optimal 36 0 1020 18 0
synsoc
19 Posts
0
September 9th, 2011 09:00
AIX 5.3. 2 x IBM 5773 4Gb with depth currently set to 16
SKT2
2 Intern
2 Intern
•
1.3K Posts
0
September 9th, 2011 09:00
which OS?
HankD1
20 Posts
0
September 9th, 2011 12:00
I don't know about the depth setting for AIX but 34 queued IO/s doesn't seem that high, you're under 2% queued. Some performance guys will tell you if you're not queuing you're not utilizing your environment.