Highlighted
alinapia
1 Copper

DELL CMC M100Oe Not Connecting after enable VLAN with same priority with CMC

Hi!

I can't connect to Dell M1000e after enable VLAN with same priority. How to access the server with Vlan enabled?If it can't be accessed how to reset the CMC so I can reconfigure it? Thanks

Labels (2)
Tags (2)
0 Kudos
1 Reply

Re: DELL CMC M100Oe Not Connecting after enable VLAN with same priority with CMC

Hello,

Your options to reset the CMC would be to either physically go to the chassis and use the front panel to select the option to  reset the configuration, or to directly connect to the CMC without any switching between your workstation and the CMC. The second option would only work if you know the IP address and are certain that the VLAN tag doesn't have any typos. 

As for accessing the CMC after assigning a VLAN, there's not much to do. The CMC would need to have the VLAN tag entered, but that's all. The GUI has the tools to set that up, but I tend to use an SSH session. I'll leave the commands below.

$ racadm config -g cfgLanNetworking -o cfgNicVLanEnable 1
$ racadm config -g cfgLanNetworking -o cfgNicVLanID <VLAN ID>

If the second command fails, you can substitute "VLanID" for "cfgNicVLanID."

#Iwork4Dell
0 Kudos