Unsolved
This post is more than 5 years old
5 Posts
0
2386
November 8th, 2018 12:00
DRAC 5 does not work, error about network teaming
I have a DRAC 5 on a PowerEdge 1950. It work working fine a few months ago, but has suddenly stopped working. I cannot access the web interface and it will not respond to pings. When going into the remote access options in OMSA (ver. 7.4.0), I get an error message saying:
| Remote Access management traffic does not function properly when the LAN on Motherboard (LOM) is teamed with any network adapter add-in cards. |
However, not only did I never enable NIC teaming, I don't have any network cards other than the built-in ones and the DRAC's dedicated one. I have it set to use the dedicated NIC, but using the "shared" option makes no difference. It's running the latest firmware (1.65). I've of course tried restarting the DRAC using racadm and rrebooting the entire server.
0 events found
No Events found!
DELL-Josh Cr
Moderator
•
9.6K Posts
•
42.2K Points
0
November 8th, 2018 14:00
Hi,
Try reseating the whole card. It is also possible that the card has failed and you need to replace it.