The issue may be that you are jumping to too new of an update. TGry this older one and if it works then try the 01.16.0001.

www.dell.com/.../DriverDetails

Let me know how it goes.

I figured that i was jumpng to a too new of a firmware level.

I downloaded the version in your link but with the same result. Also downloaded an even older version. ( the oldest i could find) 01.10.0003 with the same result.

Still not able to update, and red question marks.

Hop you have some idea's left.

The SSL error you see is because Dell is using a self-signed certificate which very likely expired.

IE does not give you the option to accept an outdated cert, while Chrome and Firefox do.

hello,

I think I have same problem but I am not able to connect using neither firefox or chrome, it always says that the connection is not secured. is there a way to disable ssl mode via serial port ?

Any ideas ?

Thanks in advanced!

Albert

Hi Robert,

Thanks for the quick reply but I have been enabling and disabling the protocols ( ssl 2.0, ssl 3.0, tls 1.0, tls 1.1  and 1.3 ) without luck, whenever i try to connect to that web page is always get ERR_SSL_PROTOCOL_ERROR. Which is the protocols i shoudl enable to make it work ?

thanks in advanced!

Albert

no luck, i also tried to add the local ip to trusted sites and set security level to low but I always get that error. i tried with internet explorer, edge, firefox and opera browsers and same error. Maybe I have the optionto replace that management card, will it work or I wills till have problem with self signed certificate ? any idea of how to access the web page and disable ssl ?

I finally managed to connect using an old version of chrome ( version 22 ), thanks for your help.

Where did you get version 22 of chrome. I having the same issue.