This post is more than 5 years old
1 Rookie
•
16 Posts
0
15698
October 25th, 2016 13:00
Linux or Windows cmd tool to access iDRAC and change bios/iDRAC settings remotely.
Hi,
Is it possible to change the bios/iDRAC settings remotely via Linux or windows command line tool for iDRAC8 based server?
if so could you please provide the download location?
0 events found
No Events found!
GhostRider419
10 Posts
1
October 25th, 2016 14:00
w*w.dell.com/support/home/us/en/04/Drivers/DriversDetails?driverId=6RWMR
You can install this on a Windows machine and use command 'racadm' from the command line.
GhostRider419
10 Posts
1
October 25th, 2016 14:00
http://www.dell.com/support/home/us/en/04/Drivers/DriversDetails?driverId=6RWMR
You can manage a your iDRAC from a windows installation with these DRAC Tools. just use 'racadm' from the command line.
ex. racadm -r -u -p
lksece123
1 Rookie
•
16 Posts
0
October 26th, 2016 07:00
Hi All, Thanks a lot for your prompt response