I'm almost there, but I have a problem with dependencies, and I'm not sure exactly which platform to use:
warning: srvadmin-tomcat-7.3.0-4.85.1.vmw40.i386.rpm: Header V3 DSA signature: NOKEY, key ID 23b66a9d error: Failed dependencies: libdsupt.so.1 is needed by srvadmin-tomcat-7.3.0-4.85.1.vmw40.i386 libomacs.so.1 is needed by srvadmin-tomcat-7.3.0-4.85.1.vmw40.i386
I just realized this was an update package. It wouldn't install over the previous OpenManage installation, so I had uninstalled it and then attempted to install the rpm packages individually when the installer failed.
OK, the new version upgraded just fine, the services are started, I'm prompted to login, but still no go. What credentials does OpenManage use on ESX? Is it root/calvin, root/ , or something else? I've used every combination I can find, but I just can't authenticate. Thanks again.
Daniel My
10 Elder
•
6.2K Posts
0
October 10th, 2015 18:00
Hello
Try this one. The installation instructions are at the bottom:
http://www.dell.com/support/home/us/en/04/Drivers/DriversDetails?driverId=TJ26M
Thanks
baskervi
1 Rookie
•
21 Posts
0
October 10th, 2015 20:00
I'm almost there, but I have a problem with dependencies, and I'm not sure exactly which platform to use:
warning: srvadmin-tomcat-7.3.0-4.85.1.vmw40.i386.rpm: Header V3 DSA signature: NOKEY, key ID 23b66a9d
error: Failed dependencies:
libdsupt.so.1 is needed by srvadmin-tomcat-7.3.0-4.85.1.vmw40.i386
libomacs.so.1 is needed by srvadmin-tomcat-7.3.0-4.85.1.vmw40.i386
Do you have any other ideas? Thank you.
baskervi
1 Rookie
•
21 Posts
0
October 10th, 2015 21:00
I just realized this was an update package. It wouldn't install over the previous OpenManage installation, so I had uninstalled it and then attempted to install the rpm packages individually when the installer failed.
Daniel My
10 Elder
•
6.2K Posts
0
October 11th, 2015 12:00
Here is 7.3
http://www.dell.com/support/home/us/en/04/Drivers/DriversDetails?driverId=5PDVY
baskervi
1 Rookie
•
21 Posts
0
October 12th, 2015 07:00
Thanks Daniel. I'm working on this now and will let you know what happens.
baskervi
1 Rookie
•
21 Posts
0
October 12th, 2015 13:00
OK, the new version upgraded just fine, the services are started, I'm prompted to login, but still no go. What credentials does OpenManage use on ESX? Is it root/calvin, root/ , or something else? I've used every combination I can find, but I just can't authenticate. Thanks again.
Daniel My
10 Elder
•
6.2K Posts
0
October 14th, 2015 10:00
OMSA uses local logon credentials of the host operating system it is installed on.
Thanks