Thanks for posting! Did you run the two commands on the download page:
2.Run the following command to perform an express install: sh linux/supportscripts/srvadmin-install.sh --express 3.Start the applicable services by running the following command: sh linux/supportscripts/srvadmin-services.sh start
Did you get any errors? If nothing seems to happen, look for an omsa install log file, and check for errors there. Once you get OMSA installed on the servers, you will need to configure your snmpd.conf file to direct SNMP traffic to a specific 32-bit Windows system. On the Windows box, you need to install IT Assistant:
Then go to http://support.dell.com/enterprise_videos and follow the instructions for setting up SNMP, discovery ranges, and email alerts in the OpenManage Enterprise Tutorials section.
DELL-Jeff M
2 Intern
•
793 Posts
0
June 18th, 2008 21:00
Thanks for posting! Did you run the two commands on the download page:
2.Run the following command to perform an express install:
sh linux/supportscripts/srvadmin-install.sh --express
3.Start the applicable services by running the following command:
sh linux/supportscripts/srvadmin-services.sh start
Did you get any errors? If nothing seems to happen, look for an omsa install log file, and check for errors there. Once you get OMSA installed on the servers, you will need to configure your snmpd.conf file to direct SNMP traffic to a specific 32-bit Windows system. On the Windows box, you need to install IT Assistant:
http://support.dell.com/support/downloads/download.aspx?&fileid=245839
Then go to http://support.dell.com/enterprise_videos and follow the instructions for setting up SNMP, discovery ranges, and email alerts in the OpenManage Enterprise Tutorials section.