Unsolved
This post is more than 5 years old
2 Posts
0
31017
June 10th, 2015 07:00
iDRAC/Lifecycle controller reporting wrong BIOS version
Hi All,
iDRAC/Lifecycle controller of a PowerEdge R720 (12G) is reporting a wrong BIOS version. I did BIOS upgrade using Lifecycle controller after a iDRAC firmware update. I did not yet applied NIC and RAID controller firmware update.
On boot it shows version 2.5.2, but both iDRAC/Lifecyle controller shows the former version 2.4.3 and suggest update. Any insight ?
regards
brasilino
0 events found
No Events found!
DELL-Shine K
6 Operator
•
3K Posts
0
June 10th, 2015 23:00
What is iDRAC and Lifecycle Controller firmware version installed on the server. Can you check the same after doing racreset.
brastedd
2 Intern
•
336 Posts
0
September 11th, 2015 10:00
Also check the CSIOR (Collect System Inventory On Restart) settings in the Lifecycle Controller and make sure that the server has done a full inventory of itself.