626 Posts

February 9th, 2006 19:00

You can only install Array Manager 3.7 from OpenManage 4.5 if you already have it installed on your system.  So, if you don't already have it, then you can download a previous version of Array Manager that has its own installation.  The following link takes you to the Array Manager 3.6 installation file: 

<ADMIN NOTE: Broken link has been removed from this post by Dell>


 
Be sure to run the custom install so that you can specify to only have the console installed.
 
Let us know how it works out for you.

7 Posts

February 9th, 2006 19:00

Thanks,  I will try it and let you know..

Message Edited by Mike__P on 02-09-2006 03:59 PM

7 Posts

February 9th, 2006 20:00

Ok, thanks, I got the 3.6 console installed, but is there a way to get this console updated to version 3.7?  I installed 3.7 on my netware server and I am unable to connect with the 3.6 console.  I am not sure if the reason is version incompatibility, or an inproper setup on my part.

Message Edited by Mike__P on 02-09-2006 04:04 PM

626 Posts

February 9th, 2006 20:00

Now that you've got AM 3.6 on that system, you need to use the Dell OpenManage Management Station 4.5 installation to upgrade the console.  You can download it here:

 

Message Edited by tester25 on 02-09-2006 04:11 PM

7 Posts

February 10th, 2006 14:00

I love a nice breadcrumb trail.  Thank you for all of your help, your methods worked perfectly. 
 
I now have my Raid 1 array configured with a global hot spare and that was my initial goal!
 
Best Regards,
 
MIke

626 Posts

February 10th, 2006 14:00

Good deal.  Glad to help.  Take care.
No Events found!

Top