Unsolved
This post is more than 5 years old
2 Posts
0
940
October 3rd, 2017 11:00
Dell Fibre J676T Drivers
Hello, I have looked all over the internet looking for drivers for a Dell J676T Fibre Card. If anyone could send me the drivers for a x64 or a link that would be amazing. Thanks
No Events found!
Daniel My
12 Elder
•
6.2K Posts
0
October 3rd, 2017 15:00
Hello
Oneconnect and Lightpulse use different drivers now. Prior to the latest release they used the same driver. It doesn't look like we have released a Oneconnect version of the latest driver, it is only available for LPE.
You can find drivers for fibre cards under the Fibre Channel section on the download page of the server. Since OCE is not available for the latest 64-bit driver you will need to select other versions and choose an older driver that supported both LPE and OCE. This is the latest version of the 64-bit driver which supports OCE I have listed:
www.dell.com/support/home/Drivers/DriversDetails?driverId=2RD7F
J676T: OCE10102-FX-D
Thanks
audavis
2 Posts
0
October 4th, 2017 12:00
Hello,
I have downloaded this software, but I cant seem to be able to figure out how to install the driver after installing it. Any help would be appreciated
Daniel My
12 Elder
•
6.2K Posts
0
October 4th, 2017 13:00
The driver is installed as part of the application installation. I don't think you can choose not to install the driver. If you installed the application the driver should be installed. When you are going through the installation process you can view the components it is installing, the driver is at the top of the list.
Thanks