KVM 2162DS question

Hello

All of this information can be found on the 2162DS support page. The KVM can be configured to use VNC or RDP. The web viewer uses Java. If the connection is refused using the viewer then it is likely blocked by Java security. You will need to adjust Java security settings to allow the connection.

www.dell.com/support/home/product-support/product/dell-kvm-2162ds/manuals

Thanks

Do i need RCS software to change choose vnc or rdp?. From the browser i am not seeing it.

I have added the ip of the swtich on java security. So its not the java issue

Thanks

Paras

Found my answer . Solution is opening port 2038 on firewall.

Thanks

Paras.

When we have a managment interface running on 1/0 , do we need to anythig special to enable http web access ?

http-server http is enabled  but not working on this switch

Thanks

Paras

do we need to anythig special to enable http web access ?

Page 38 of the switch hardware manual has instructions for setting up the Embedded Web Server/On-board Web Interface. There are multiple sections of the hardware manual that have information on the OBWI.

Thanks